Experience with Modular Necks for Cemented Total Hip Arthroplasty
Keywords:cemented stem, modular neck, trunion, taper junction
This is a retrospective review of two series of using the same stem and modular neck design (R-120â„¢) with the exception that the second series had an improved modular neck construct. Model I, 145 stems implanted between 2002 and 2005. Taper neck problems consisted of two neck trunion fractures at the neck stem junction and one modular neck disassociation at the modular junction. Stem was withdrawn from the market and redesigned to a more robust structure.
Model II, 188 stems were implanted between 2007 and 2011 by the senior author utilizing the same surgical technique. There have been no modular neck taper problems.
This paper will demonstrate that once a modular junction problem has been identified corrective action can be taken to resolve the problem. We advocate that there is a benefit to a modular neck cemented stem design and all modular junctions are not equal in design or function.
Guerin S, and Jones C. Cemented Femur. In: Cashman J, Goyal N, Parvizi J, eds. The Hip: Preservation, Replacement and Revision. Baltimore, MD: Data Trace Publishing Company; 2015: 71-1 to 71-10.
Cameron H, Leslie, C, McTighe T. Design Considerations and Results for a Modular Neck in Cemented THA. Conference: The 21st Annual Conference of the International Society for Technology in Arthroplasty, At Seoul, Korea. Poster Exhibit
McTighe T, Keggi K, Reynolds HM, Smit M, Keggi J, Cameron HU, Stulberg B. Design Considerations for a Modular Neck in Total Hip Arthroplasty.
Conference: OARSI Annual Meeting 2003, Volume: Poster Exhibit
Benedetti MG, Catani F, Benedetti E, Berti L, Di Gioia A, and Giannini S. To what extent does leg length discrepancy impair motor activity in patients after total hip arthroplasty? International Orthopaedics (SICOT) (2010) 34:1115 –1121
Clark CR, Huddleston HD, Schoch EP, and Thomas BJ. Leg-Length Discrepancy After Total Hip Arthroplasty. J Am Acad Orthop Surg 2006; 14: 38-45
McTighe T, Trick L, and Koeneman JB. Design Considerations for Cementless Total Hip Arthroplasty. In book: ENCYCLOPEDIC HANDBOOK OF BIOMATERIALS AND BIOENGINEERING, Edition: Part B: Applications Volume I 1995, Publisher: Marcel Dekker, Inc., pp. 3 to 43. DOI: 10.13140/RG.2.1.2919.0240
McTighe T, Brazil D, Clarke I, Keppler L, Keggi J, Tkach T, and McPherson E. Metallic Modular Taper Junctions in Total Hip Arthroplasty. JISRF • Reconstructive Review • Vol. 5, No. 2, July 2015. DOI: 10.15438/rr.5.2.108
Keggi K, Keggi J, Kennon R, Tkach T, et. al. Within Any Important Issue, There are Always Aspects No One Wishes to Discuss” – Femoral Component Failure. Conference Poster, ISTA, September 2006. DOI: 10.13140/RG.2.1.4779.6329
McTighe T, and Tkach T. Design Considerations for Modular Junctions. Conference: Research on Modularity Hip Scientific Meeting sponsored by Global Orthopaedic Technology Oct. 9-10, 2009, At Gold Coast, Australia, Volume: Oral Paper. DOI: 10.13140/RG.2.1.2957.5441
How to Cite
Copyright (c) 2016 Hugh Cameron, Timothy McTighe
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Copyright and License Agreement:
Authors who publish with the Reconstructive Review agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work. Reconstructive Review follows the Creative Commons Attribution-NonCommercial CC BY-NC. This license allows anyone to download works, build upon the material, and share them with others for non-commercial purposes as long as they credit the senior author, Reconstructive Review, and the Joint Implant Surgery & Research Foundation (JISRF). An example credit would be: "Courtesy of (senior author's name), Reconstructive Review, JISRF, Chagrin Falls, Ohio". While works can be downloaded and shared they cannot be used commercially.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.